western D45 FLASH FILE 100% tested Miracle red

western D45 flash file 100%  tested Miracle red

  Connecting to Phone,Wait..

  Done.

  Infor: SPRD3

  Initialize boot9...

  CPU    type: 6531A

  Flash  type: NOR

  Flash    ID: 00C80060(00160000)

  Flash Model: GD27LQ32

  Flash  Size: 0x400000(4.0M)

  Being analyzed,Wait...

  Read Error. ID: 82

  Definition Applied

  1. Power Off Phone , Remove Battery, Insert Battery Back

  2. Please Hold BootKey(UP and DOWN),Insert USB cable

  3. Use Miracle Boot Key In cases Boot key not Find

  4. Battery Should be Charged more then 50%

  Scanning USB Serial port...

  SU2Serial Port: COM3

  Connecting to Phone,Wait..

  Done.

  Infor: SPRD3

  Initialize boot9...

  CPU    type: 6531A

  Flash  type: NOR

  Flash    ID: 00C80060(00160000)

  Flash Model: GD27LQ32

  Flash  Size: 0x400000(4.0M)

  Being analyzed,Wait...

  IMEI1 :355544080097114

  IMEI2 :355544080097122

  IMEI3 :358570010103893

  IMEI4 :910575601400468

  Screen lock: 0111

  Privacy  Code: 0000

  Unlock  Code: 0000

>>If try all code and wrong, please read whole flash and then analyzed

DOWNLOAD

01748248579

mycell bee24 cm2 red file 100% tested

Myell bee24 cm2 red file 100% tested

Operation : Read FullFlash [ v1.27 ]

Try again 

Reconnect Power/Cable!

Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert USB cable

2. Press and hold BootKey ( Skip, if use BootCable )

3. Insert battery

 ====  Wait for phone...

Phone found! [ 3 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending boot ... 

Boot Sent , starting...

Boot Ver : Spreadtrum Boot Block version 1.2

Boot Ok

CPU ID : 6531 , FDLStat : 0100

[0] Flash DIE : 00EF 0040 0016 0000

[0] Flash VEN : Winbond , W25Q32

[0] Flash CAP : 00400000

Read Flash Content

Read Ok , collect info

Set FileInfo : 

Model Vendor : MYCEL

Model Name   : BEE24

Saved to : C:\InfinityBox\CM2SPD\Read_out\SPD6531_00400000_W25Q32__MYCEL-BEE24.bin

Done!

Elapsed: 00:00:45

Reconnect Power/Cable!

DOWNLOD

01748248579

PASS WORD BY RM TELECOM

ITEL FREE FILE

i485791355rmt
i4857911rmta
i4867913rmta
i485791513rmt
i4857912rmts
i48579p32rmt
https://rmtelecomjewel.blogspot.com/

Q PHONE Q21 SPD 6531E XTM_Miracle Thunder 2.82 red FLASH FILE 100%

Q PHONE Q21_Miracle Thunder 2.82

 Definition Applied

  1. Power Off Phone , Remove Battery, Insert Battery Back

  2. Please Hold BootKey(UP and DOWN),Insert USB cable

  3. Use Miracle Boot Key In cases Boot key not Find

  4. Battery Should be Charged more then 50%

  Scanning USB Serial port...

  SU2Serial Port: COM3

  Connecting to Phone,Wait..

  Done.

  Infor: SPRD3

  Initialize boot33...

  CPU    type: 6531E

  Flash  type: NOR

  Flash    ID: 00C80060(00160000)

  Flash Model: GD27LQ32

  Flash  Size: 0x400000(4.0M)

  reading,Wait...

  Read Completed.

>>File save to: C:\Users\rmt\Desktop\6531E_GD27LQ32.bin

DOWNLOAD

01748248579

SMART S 25 100% tested

                                     
         

    MT6572_NAND_alps__SMART S-25___5.1__MP.V1.0

Operation : Format FileSystem [ v1.58 ]

Wait for phone...

Phone found! [ 6 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6572

BB_CPU_NME : [MediaTek] MT6572_S00

BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x88

NAND Flash : 00AD00BC00900055005400AD00BC0000

eMMC Flash : NOT INSTALLED

Initialize Memory ... 

DRAM already initialized by Preloader

DAgent sent , init HW now

NAND FlashIC initialized

[NAND] : FLASH_VEN : 0x008C , [SAMSUNG] KA100O015B_BJTT

[NAND] : FLASH_DIE : 00AD 00BC 0090 0055 0054 00AD 00BC

[NAND] : FLASH_LEN : 0x20000000

[NAND] : FLASH_EXT : 0800/0040/01/NIM_Px-2

DEV RID    : 0x7A6237872F207C5B41BBBC3378B57E82

INT RAM    : 0x00020000

EXT RAM    : 0x20000000 [512 MiB]

BOOT TYPE  : NAND_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

Reading Flash Content now ... 

[Read Ok] : preloader_s15_72_nand_mbo_a36_s29_44.bin

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : secro.img

[Read Ok] : logo.bin

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : usrdata.img

[ScatCFG] : MT6572 / V1.1.1 / s15_72_nand_mbo_a36_s29_44 / NAND

FW Size : 257 MiB

Brand     : alps

ProdName  : SMART S-25

ProdModel : SMART S-25

AndroidVer: 5.1

MTKxCPU   : MT6572

MTKxPRJ   : MP.V1.0

Android Info saved

Scatter saved to : D:\SOFTWER\New folder (2)\MT6572_NAND_alps__SMART S-25___5.1__MP.V1.0

Done!

Elapsed: 00:02:43

Reconnect Power/Cable!

DOWNLOD

01748248579

Agetel AG3 flash file 100% Tested

Agetel AG3 flash file 100% Tested

 jewel dumki rm telecom

DOWNLOAD

01748248579

Symphony v47 flashe file 100000% tested cm2 red

                                                                          SAMPHONY\V\MT6580__Symphony__V47__7.0

   

    

Wait for phone...

Phone found! [ 22 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6580

BB_CPU_NME : [MediaTek] MT6580_S00

BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x9C

NAND Flash : NOT INSTALLED

eMMC Flash : 150100464E58324D42060F38D4A964EB

Initialize Memory ... 

DRAM already initialized by Preloader

Reading Flash Content now ... 

xGPT : Normalize settings Ok!

Brand     : Symphony

ProdName  : V47

ProdModel : V47

Device    : V47

AndroidVer: 7.0

MTKxCPU   : MT6580

MTKxPRJ   : alps-mp-n0.mp2-V1_len6580.we.n_P50

[Read Ok] : preloader_rs631.bin

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : logo.bin

[Read Ok] : tz1.img

[Read Ok] : tz2.img

[Read Ok] : secro.img

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / rs631 / EMMC

Android Info saved

HWConfig Info saved

FW Size : 2155 MiB

Scatter saved to : D:\SOFTWER\New folder (2)\SAMPHONY\V\MT6580__Symphony__V47__V47__7.0__alps-mp-n0.mp2-V1_len6580.we.n_P50\

All done!

Done!

Elapsed: 00:10:20

Reconnect Power/Cable!

DOWNLOAD

01748248579

WALTON\MT6739__WALTON__Primo_H8__8.1.0

WALTON\MT6739__WALTON__Primo_H8__8.1.0

Patch Level    : O11019

Display ID     : Primo_H8_20190327_V15

Ver. CodeName  : REL

Ver. Release   : 8.1.0

Sec. Patch     : 2018-12-05

Build Time     : 1547289254

Product Model  : Primo H8

Product Brand  : WALTON

Product Name   : Primo_H8

Product Device : Primo_H8

Product Manfct : WALTON

Product Info   : Primo_H8

Product Board  : WALTON

Board Platform : mt6739

MT6739__WALTON__Primo_H8__8.1.0__Primo_H8_20190327_V15__O11019__Primo_H8

Read : preloader.bin

Read : recovery.img

Read : proinfo.img

Read : md1rom.img

Read : md1dsp.img

Read : spmfw.img

Read : mcupmfw.img

Read : nvram.bin

Read : lk.bin

Read : loader_ext.img

Read : boot.img

Read : logo.bin

Read : odmdtbo.img

Read : tz.img

Read : vendor.img

ExtSparse : Compression ratio : 65%

Read : system.img

ExtSparse : Compression ratio : 37%

Read : cache.img

Read : userdata.img

FW Size  : 2.13 GB

Android Info saved : _Android_info.txt

Scatter  : MT6739_Android_scatter.txt

Saved to : D:\SOFTWER\New folder (2)\WALTON\MT6739__WALTON__Primo_H8__8.1.0__Primo_H8_20190327_V15__O11019__Primo_H8\

Done!

Elapsed: 00:04:07

DOWNLOAD

01748248579

Twin most mq703w MT6580 Flash file 100% Tested

Twin most mq703w MT6580 Flash file 

Wait for phone...

Phone found! [ 4 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6580

BB_CPU_NME : [MediaTek] MT6580_S00

BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x9C

NAND Flash : NOT INSTALLED

eMMC Flash : 8801034E436172642022FA0DF12374FB

Initialize Memory ... 

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x88 , OEM : 0103

[eMMC] : FLASH_INF : [FORESEE] , draC

[eMMC] : FLASH_CID : 8801034E436172642022FA0DF12374FB

[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000

[eMMC] : FLASH_LEN : 0x00000001CE100000

[eMMC] : FLASH_UCP : 7393 MiB [eMMC 8 GiB]

DEV RID    : 0x7A623787DE7FCBFF8C62053FEB260E7C

INT RAM    : 0x00020000

EXT RAM    : 0x40000000 [1 GiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

[AP] : Initial info read Ok!

Brand     : K706

ProdName  : MQ703W

ProdModel : MQ703W

Device    : K706

AndroidVer: 7.0

MTKxCPU   : MT6580

MTKxPRJ   : alps-mp-n0.mp2-V1.23.1_joyasz8321.tb.n_P35

Done!

Elapsed: 00:00:09

Reconnect Power/Cable!

Downlod

01748248579

Lecom 8585 flash file 100% tested

Lecom 8585 hang logo fix flash file

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey

Wait for phone...

Phone found! [ 4 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6572

BB_CPU_NME : [MediaTek] MT6572_S00

BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x88

NAND Flash : 00AD00BC00900055005400AD00BC0000

eMMC Flash : NOT INSTALLED

Initialize Memory ... 

DRAM already initialized by Preloader

DAgent sent , init HW now

NAND FlashIC initialized

[NAND] : FLASH_VEN : 0x008C , [SAMSUNG] KA100O015B_BJTT

[NAND] : FLASH_DIE : 00AD 00BC 0090 0055 0054 00AD 00BC

[NAND] : FLASH_LEN : 0x20000000

[NAND] : FLASH_EXT : 0800/0040/01/NIM_Px-2

DEV RID : 0x7A6237879A2A879A80ED7CE576DBA45A

INT RAM : 0x00020000

EXT RAM : 0x20000000 [512 MiB]

BOOT TYPE : NAND_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

[AP] : Initial info read Ok!

Brand : alps

ProdName : 8585

ProdModel : 8585

Device : zma12_msk_a7512_8585_nd44_2k_b15_fl

AndroidVer: 4.4.2

MTKxCPU : MT6572

MTKxPRJ : ALPS.KK1.MP7.Band1.2.5.V1.3

Done!

Elapsed: 00:00:15

Reconnect Power/Cable!

Download

01748248579

Invens E1 SP7731 6.0 Firmware 100% tested

Invens E1 SP7731 6.0 Firmware

==== Wait for phone...

Phone found! [ 4 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SC7731 Crev eMMC Loader v2.0 

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!

FlashMode Set : Ok!

Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!

- > Wait phone connected ... 

Phone found! [ 4 ]

Port Opened

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SC7731 Crev eMMC Loader v2.0 

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!

Model Name : E2

Model Brand : Eager

Model Device: E2

AndrVersion : 6.0

BaseBand CPU: SP7731CEB

Project Ver : Eager-E2_Android_6.0_V01_20171219

Model Ext : E2

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ... 

[Read Ok] : u-boot-spl-16k.bin

[Read Ok] : u-boot.bin

[Read Ok] : prodnv.img

[Read Ok] : sc7731C_CP0_modem.bin

[Read Ok] : DSP_DM_Gx.bin

[Read Ok] : nvitem_w.bin

[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W17.27.4_Release.bin

[Read Ok] : nvitem_wcn.bin

[Read Ok] : logo_480x854.bin

[Read Ok] : fblogo_480x854.bin

[Read Ok] : boot.img

[Read Ok] : system.img

[Read Ok] : sysinfo.img

[Build Ok] : cache.img

[Read Ok] : recovery.img

[Build Ok] : userdata.img

AndroidInfo created

Firmware Size : 1877 MiB

Saved to : C:\Users\mdforhad\Desktop\Odin3_v3.10.7\SP7731CEB_E2_6.0_Eager-E2_Android_6.0_V01_20171219_E2\

Done!

Elapsed: 00:07:31

Reconnect Power/Cable!

Download

01748248579

Symhpony BL90 flash file

Symhpony BL90 flash file

Wait for phone…

Phone found! [ 17 ]

Sync…

Sync Ok, read regs…

Inital regs read done

Boot Info : 

BB_CPU_ID : 6261

BB_CPU_HW : CB01

BB_CPU_SW : 0001

BB_CPU_SB : 8000

BB_CPU_NM : [MediaTek] MT6261_S0000

BB_CPU_SN : 88403A0C73B9FA1716C5A518750FA701

BROM Protocol Version : 05

Setting…

Setting done , result code 0x000E

BROM stage done

Seek and prepare DownloadAgent

DownloadAgent matching HW Found!

DA verify and select done

Sending DA to target …

DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E

SOC_VERIFY : 0xC1

BOOT_STYLE : SF_FLASH_BOOT

NOR Flash IC initialized

[0] : FLASH_VEN : 0x0112 , [MXIC] MX25L3291FWJI_09

[0] : FLASH_DIE : 00C2 0020 0016 0000 

[0] : FLASH_LEN : 0x00400000

SDS_INFO : 0x003FE000 , 0x00002000

INT_RAM : 0x0000D000

EXT_RAM : 0x00400000

Reading Flash Content now …

Read Flash now

Read Ok , 4194304 bytes read

Check and collect compile info

File_Info : FISE61D_11C_PCB01_gprs_MT6261_S00.BL90_HW1_V7.bin

FileVersion : BL90_HW1_V7

Saved to :C:\InfinityBox\CM2MTK\Read_out\FISE61D_11C_PCB01_gprs_MT6261_S00.BL90_HW1_V7.bin

Done!

Elapsed: 00:00:12

Reconnect Power/Cable!

Downlod

01748248579

symphony D38i SC6531E FLASH File 100% tested

Symphony D38i SC6531E FLASH File

Card found : 02340395 , v0138Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.04
SCRD mode : AUTOSPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ]
SPRD mode : SC6531 : REV : E001 : NOR : [ 4MB-8MB ]
Operation : Read Flash [ v1.04 ]
1. Power off device2. Press and hold BootKey or use BootCable3. Insert cable and battery in device!
Wait for device ...
Device Connected!BootVersion : SPRD3BootSource : InternalLibraryBootVersion : Infinity SCR 6531EFM v1.1 (c)2019Port speed : 921600FDL Flash : Control transfered!
Boot Done!
CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]
Read Ok, 4194304 bytes
Saved to : C:\Users\RM\Desktop\SC6531_SPI_GIGADEVICE_GD25Q_4MiB.bin
Done!Elapsed: 00:01:03
Reconnect Power/Cable!

Download

01748248579

symphony L40 flash file without password

symphony L40 flash file without password

Operation : Read Flash [ v1.04 ]

1. Power off device

2. Press and hold BootKey or use BootCable

3. Insert cable and battery in device!

Wait for device ... 

Device Connected!

BootVersion : SPRD3

BootSource  :  InternalLibrary

BootVersion : Infinity SCR 6531EFM v1.1 (c)2019

Port speed : 921600

FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Read Ok, 4194304 bytes

Saved to : C:\Users\RM\Desktop\SPRD_SPI_WINBOND_W25Q_4MiB.bin

Done!

Elapsed: 00:00:59

Reconnect Power/Cable!

Download

01748248579

Symphony l16 hw2 flash file 100% tested

SymphonyL16 hw2 flash file 

Wait for phone...

Phone found! [ 6 ]

Sync...

Sync Ok, read regs...

Inital regs read done

Boot Info : 

BB_CPU_ID : 6261

BB_CPU_HW : CB01

BB_CPU_SW : 0001

BB_CPU_SB : 8000

BB_CPU_NM : [MediaTek] MT6261_S0000

BB_CPU_SN : 4A0CA1DC32390E167EF526608BB4D140

BROM Protocol Version : 05

Setting...

Setting done , result code 0x000E

BROM stage done

Seek and prepare DownloadAgent

DownloadAgent matching HW Found!

DA verify and select done

Sending DA to target ...

DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E

SOC_VERIFY : 0xC1

BOOT_STYLE : SF_FLASH_BOOT

NOR Flash IC initialized

[0] : FLASH_VEN : 0x0112 , [MXIC] MX25L3291FWJI_09

[0] : FLASH_DIE : 00C2 0020 0016 0000 

[0] : FLASH_LEN : 0x00400000

SDS_INFO : 0x003FE000 , 0x00002000

INT_RAM : 0x0000D000

EXT_RAM : 0x00400000

Reading Flash Content now ... 

Read Flash now

Read Ok , 4194304 bytes read

Check and collect compile info

File_Info   : HONGYU61M_11C_PCB01_gprs_MT6261_S00.L16_HW1_V6.bin

FileVersion : L16_HW1_V6

Saved to : C:\InfinityBox\CM2MTK\Read_out\HONGYU61M_11C_PCB01_gprs_MT6261_S00.L16_HW1_V6.bin

Done!

Elapsed: 00:00:20

Reconnect Power/Cable!

Download

01748248579

Symphony bl60 hw4 flash file 10000% tested

Symphony bl60 hw4 flash file

Wait for phone...

Phone found! [ 6 ]

Sync...

Sync Ok, read regs...

Inital regs read done

Boot Info : 

BB_CPU_ID : 6261

BB_CPU_HW : CB01

BB_CPU_SW : 0001

BB_CPU_SB : 8000

BB_CPU_NM : [MediaTek] MT6261_S0000

BB_CPU_SN : 80D66EDA6C984A22A5367027E4DF494C

BROM Protocol Version : 05

Setting...

Setting done , result code 0x000E

BROM stage done

Seek and prepare DownloadAgent

DownloadAgent matching HW Found!

DA verify and select done

Sending DA to target ...

DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E

SOC_VERIFY : 0xC1

BOOT_STYLE : SF_FLASH_BOOT

NOR Flash IC initialized

[0] : FLASH_VEN : 0x0113 , [Winbond] SF_W25Q32JV

[0] : FLASH_DIE : 00EF 0070 0016 0000 

[0] : FLASH_LEN : 0x00300000

SDS_INFO : 0x002FE000 , 0x00002000

INT_RAM : 0x0000D000

EXT_RAM : 0x00400000

Reading Flash Content now ... 

Read Flash now

Read Ok , 3145728 bytes read

Check and collect compile info

File_Info   : HONGYU61M_11C_PCB01_gsm_MT6261_S00.BL60_HW3_V9.bin

FileVersion : BL60_HW3_V9

Saved to : C:\InfinityBox\CM2MTK\Read_out\HONGYU61M_11C_PCB01_gsm_MT6261_S00.BL60_HW3_V9.bin

Done!

Elapsed: 00:00:19

Reconnect Power/Cable!

DOWNLOAD

01748248579

Winstar Discovery-7 FLASH FILE SPD6531E-1000% Tested

Winstar Discovery-7 FLASH FILE

 

  

 

Welcome to use Miracle Box
 (World's First Fuzzy Logic Based Tool)
  Update:18-07-12
  Connected OK.
  Expire date:
  Miracle Thunder More Faster More Powerfull !
  Check Authentication...
  Network connected error
  Definition Applied
  1. Power Off Phone , Remove Battery, Insert Battery Back
  2. Please Hold BootKey(UP and DOWN),Insert USB cable
  3. Use Miracle Boot Key In cases Boot key not Find
  4. Battery Should be Charged more then 50%
  Scanning USB Serial port...
  SU2Serial Port: COM19
  Connecting to Phone,Wait..
  Done.
  Infor: SPRD3
  Initialize boot33...
  CPU    type: 6531E
  Flash  type: NOR
  Flash    ID: 00EF0040(00160000)
  Flash Model: W25Q32BV
  Flash  Size: 0x400000(4.0M)
  reading,Wait...
  Read Completed.
>>File save to: C:\Users\rmt\Desktop\6531E_W25Q32BV.bin

Symphony B13i flash file

 Symphony B13i flash file

 

Read Ok!

Saved to : C:\Users\jewel\Desktop\New folder (2)\FLASH_DUMP.bin

Done!  

Symphony B16 flash file

 Symphony B16 flash file

 

Read Ok!

Saved to : C:\Users\jewel\Desktop\New folder (2)\FLASH_DUMP.bin

Done!  

 

Mycell Bee 17 flash file 1000% tested

Mycell Bee 17 flash file 

  

 Welcome to use Miracle Box
 (World's First Fuzzy Logic Based Tool)
  Update:18-07-12
  Connected OK.
  Expire date:
 Miracle Thunder More Faster More Powerfull !
  Definition Applied
  1. Power Off Phone , Remove Battery, Insert Battery Back
  2. Please Hold BootKey(UP and DOWN),Insert USB cable
  3. Use Miracle Boot Key In cases Boot key not Find
  4. Battery Should be Charged more then 50%
  Scanning USB Serial port...
  SU2Serial Port: COM19
  Connecting to Phone,Wait..
  Done.
  Infor: SPRD3
  Initialize boot33...
  CPU    type: 6531E
  Flash  type: NOR
  Flash    ID: 00C80060(00160000)
  Flash Model: GD27LQ32
  Flash  Size: 0x400000(4.0M)
  reading,Wait...
  Read Completed.
>>File save to: C:\Users\rmt\Desktop\6531E_GD27LQ32.bin

 

western d32 flash file 10000000% tested

Western d32 flash file .RM.TELECOM

  Definition Applied

  1. Power Off Phone , Remove Battery, Insert Battery Back

  2. Insert USB cable. In some cases Required Hold BootKey

  3. Use Miracle Boot Key In cases Boot key not Find

  4. Battery Should be Charged more then 50%

  ***   the Port be occupied.

  Waiting for USB Port...

  Set MediaTek USB Port (COM7)

  Connecting to Phone,Wait..

  Connected to Phone.

  CPU: MT6261_S0001 Ver: CB01  md:8000

  Downloading Boot7 ...

  Nor/SF Flash Type: NOR_NEW_0113

  Nor Flash Code: 00EF0070(00160000)

  Nor/SF Flash Size: 0x400000 Hex Bytes

  INT/EXT RAM  Size: 0x0/0x0

  Reading(Nor)...

  The phone information:

  RDR61D_F109_PCB01_GPRS_MT6261_S00.F109_61D_KT2801WT_D32_V01_180926.BIN

  the  file not be encrypted

  Read OK.

  Total time: 0 mins 8 s

>>File Save to: C:\Users\rmt\Desktop\RDR61D_F109_PCB01_GPRS_MT6261_S00.F109_61D_KT2801WT_D32_V01_180926.BIN.bin

super fhone sf88 FLASH FILE 1000% TESTED

SUPER FHONE SF88 JEWEL.DUMKI,

  Welcome to use Miracle Box

 (World's First Fuzzy Logic Based Tool)

  Update:18-07-12

  Connected OK.

  Expire date:

  Miracle Thunder More Faster More Powerfull !

  Check Authentication...

  Network connected error

  Definition Applied

  1. Power Off Phone , Remove Battery, Insert Battery Back

  2. Please Hold BootKey(UP and DOWN),Insert USB cable

  3. Use Miracle Boot Key In cases Boot key not Find

  4. Battery Should be Charged more then 50%

  Scanning USB Serial port...

  count:=0_

  None SU2Serial Port.

  1.Please Make sure install the driver

  2.The Phone may be required to read and write keys

  3.Pulled low may not, manually set.

  Definition Applied

  1. Power Off Phone , Remove Battery, Insert Battery Back

  2. Please Hold BootKey(UP and DOWN),Insert USB cable

  3. Use Miracle Boot Key In cases Boot key not Find

  4. Battery Should be Charged more then 50%

  Scanning USB Serial port...

  SU2Serial Port: COM19

  Connecting to Phone,Wait..

  Done.

  Infor: SPRD3

  Initialize boot9...

  CPU    type: 6531A

  Flash  type: NOR

  Flash    ID: 00EF0040(00160000)

  Flash Model: W25Q32BV

  Flash  Size: 0x400000(4.0M)

  reading,Wait...

  Read Completed.

>>File save to: C:\Users\rmt\Desktop\6531A_W25Q32BV.bin